Forums | NoesisGUI

Hi,

I thought I discovered a bug but actually its just the way Noesis Studio functions with regards to using Borders and setting the corner radius individually for each corner, and the same also applies to border thickness.

Version:
v.0.1.243-beta

Reproduce steps:

- Add a border
- Change Corner Radius to 'Individual'
- Set different values for each corner radius
- Deselect the border
- Select the border again

Expected result:
It should look the same as before you deselected it: Still set to 'individual' and you can clearly see each value you set.

Actual result:
- It unsets itself from individual and back to uniform
- All individual corner values revert to the top left corner value.
- If you change it back to individual, you then get to see the values you originally set

Video:
https://www.dropbox.com/scl/fi/auz0mfgm ... 5rlyl&dl=0

-----

I feel like this is a bit of a convoluted workflow if you just simply click a border and want to see the corner radius values that you set - it feels like it 'unsets' the values and isn't being clear to what it really is.

Another example:
put 0 in top left corner -> put 30 in every other corner -> deselect the border -> select the border again, all the corners show 0 (when I should be able to see that they are 30)

I tried searching to see if this was an existing issue or anything but I couldn't find it, hope this helps!

Gavin

Actually I've just noticed this happens with alot of properties across Noesis that allow you to unlock from uniform and set to individual adjustments - it's not limited to just Thickness/Corner Radius.

Call me crazy, but I think its a bit counter intuitive/misleading, if you were working in studio and then you decided to look at one of these properties, you can't assume it to be correct, it could show 0, but it might not be 0 until you actually unlock from uniform and double check

Hello, we are aware of this issue and already fixed it for the next release.
Thanks for reporting it!