Forums | NoesisGUI

Posted: **11 Feb 2016, 17:30**

Hi there,

Using a Converter in a DataTrigger binding is not working, the Converter's return value seems to be ignored and the original value is used instead.

Example:

<DataTrigger Binding="{Binding EquipmentSlot.Equipment.OperatingPowerLevel, Converter={StaticResource Return2TestConverter}}" Value="2">
    <Setter Property="Stroke" Value="#FF4BAABE" />
</DataTrigger>

In the above example the Return2TestConverter converter always returns 2. However the DataTrigger only triggers when the value of EquipmentSlot.Equipment.OperatingPowerLevel is 2.

Would it be possible to get this corrected?

On a side note (and far less important) I have seen WPF examples use Value="True" and Value="False" for boolean values. These do not seem to work in Noesis.

Thanks!

Posted: **11 Feb 2016, 17:38**

Yes, there is task to allow the use of converters in DataTriggers for 1.2.6 version: https://trello.com/c/Qqy1Vgd6

On a side note (and far less important) I have seen WPF examples use Value="True" and Value="False" for boolean values. These do not seem to work in Noesis.

Do you mean in DataTriggers? Because "True" and "False" are used all around the NoesisStyle templates.

Posted: **11 Feb 2016, 17:45**

Actually sorry, I just realised I had tested "True" and "False" with a Converter (before I realised they were ignored). The Converter was the issue there.

Glad to hear the fix is incoming.

Thanks for your time.

Posted: **29 Apr 2016, 15:00**

This was fixed in 1.2.6

Forums | NoesisGUI

DataTriggers seem to ignore Converters

DataTriggers seem to ignore Converters

Re: DataTriggers seem to ignore Converters

Re: DataTriggers seem to ignore Converters

Re: DataTriggers seem to ignore Converters